How to Enable 2FA on Hostinger (hPanel) (Step-by-Step, 2026)

In the Hostinger dashboard click your profile icon > Security, click Turn on beside Two-factor authentication, choose Authentication app, scan the QR code with 2Fa Live and click Verify.

Short answer: In the Hostinger dashboard click your profile icon > Security, click Turn on beside Two-factor authentication, choose Authentication app, scan the QR code with 2Fa Live and click Verify.

Last verified 19 November 2026 against the vendor's official help page. Menu names can change, so follow the labels on your screen if they differ.

Before you start

  • A Hostinger account you can log in to, and access to your account email: Hostinger sends a confirmation code there during setup.
  • Hostinger lists Authy, Google Authenticator and NordPass as example apps; a standard TOTP app such as 2Fa Live works the same way.
  • 2Fa Live open in a browser on the device that will hold your codes.

Steps

  1. Open Security. Log in to the Hostinger dashboard, open the profile icon menu and select Security.
  2. Turn on two-factor. On the Two-Factor Authentication Setup page click Turn on beside Two-factor authentication.
  3. Choose Authentication app. Choose Authentication app and click Select, enter your account password and click Submit, then enter the code sent to your email and click Confirm.
  4. Scan with 2Fa Live. Click Continue, scan the QR code with 2Fa Live, enter the generated code and click Verify. If scanning fails, click Show code and enter it manually.
  5. Save backup codes. Download or print your backup codes, then click Finish setup. The page then shows Mobile authentication method as On.

Scan with 2Fa Live

When Hostinger (hPanel) shows its QR code, open 2Fa Live and add a new account by scanning it. The QR code reader page can read the code for you. If you cannot scan, choose manual entry and type the setup key (also called the secret key) that Hostinger (hPanel) displays, then give the entry a clear label so you can tell your accounts apart.

Finish by typing the 6-digit code that 2Fa Live shows back into Hostinger (hPanel). TOTP codes are time-based and change every 30 seconds by default, so enter the current one. 2Fa Live stores your secrets encrypted in your browser only; nothing is sent to a server.

Backup codes and recovery

Hostinger states that backup codes are shown only once. If you did not save them, turn off two-factor authentication and set it up again to receive new codes.

2Fa Live keeps your data in this browser only, so clearing site data or switching browsers removes your accounts. Create a local backup from the Data Management section after each new account, and store it away from the device you use every day.

Troubleshooting

  • Hostinger Webmail has its own 2FA under All Settings > Account > Add 2FA, separate from the dashboard login; only one method can be active at a time there.
  • If you cannot scan, click Show code and type the setup code in 2Fa Live.
  • If every code is rejected, set your device date and time to automatic and use the next code: TOTP depends on the clock.
  • Check that you are copying the code from the Hostinger (hPanel) entry in 2Fa Live, not another account.

Source: Hostinger (hPanel) official help page. Official Hostinger support article fetched. It refers to the Hostinger dashboard (hPanel); Hostinger Webmail has a separate 2FA setup.

Related guides

Frequently asked questions

Is this for hPanel or Webmail?

This guide is for your Hostinger dashboard login. Hostinger Webmail has a separate 2FA setup.

What if I did not save my backup codes?

Hostinger says they are shown only once; turn 2FA off and on again to get new codes.

Is it safe to add my Hostinger (hPanel) secret key to 2Fa Live?

2Fa Live stores your secrets encrypted in your browser only, not on a server. Still, treat the setup key like a password: never share it, and protect the device and browser profile you use.